Induction Hardened Chrome Plated Bars

Induction Hardened Chrome Plated Bars are produced by using advanced processing techniques usually on AISI 1045/1050 or 10v45 steel rods, for surface removal, polishing, induction hardening, followed by hard chrome plating to a thickness minimum of 0.0005” or 0.001” per side. The finished product results in a superior impact resistant bar ideal for high quality piston rods capable of handling tough environments.

  • Common grades AISI 1045 / 1050 or 10v45 steel
  • Typically meets ASTM A108, A311 class B
  • Metric sizes available
  • Hardness of chrome plating HRc 60-72
  • Surface hardness of HRc 50 minimum
  • Minimum hardness case depth at 0.050″
  • Stocked in 12’ – 24’ lengths
  • Cut to length service available
  • Hard chrome plated thickness per side: minimum 0.0005”(0.0127mm), 0.001” (0.0254mm)
  • Surface finish of 16 Ra maximum
  • Offered in minimum yield strengths of 75k and 100k
  • Custom made diameters and chrome thickness available upon request
chrome plated bar
Chrome Plated Bar
https://anbaohydraulic.com/our-products/hollow-chrome-plated-bar/
Posted in Chrome Plated Rod.